Leister DRIVE - Application

10
Operating Instructions
(Translation of the original operating instructions)
GB
Leister TRIAC DRIVE consists of
– DRIVE unit
– Hot air blower, TRIAC AT or TRIAC ST
– Supporting carrier
– Pressure roller
– Overlap welding nozzle
– Guide handle
• With the drive unit, DRIVE, overlap welding using the compact TRIAC DRIVE tool
is simplified, especially for roof and tunnel construction.
• The semi-automatic overlap welding tool, TRIAC DRIVE, is suitable for vertical and
horizontal use.
•Welding of thermoplastics as well as single ply elastoplasts in the form of:
– Geomembranes
– Foils
– Water bars
– Coated fabrics
Application
Leister DRIVE
Leister TRIAC DRIVE: Read the TRIAC
AT or TRIAC ST and DRIVE operating
instructions carefully before using and
keep for future reference.
DRIVE
TRIAC AT
TRIAC ST
128.715_DRIVE__D_GB_F_E_I_NL_S_Deutsch_TriacDrive.qxd 11.07.13 08:05 Seite 10