LEITZ LABORLUX S User Manual

Attaching microscope tubes and inserting eyepieces.

Screwing objectives into the nosepiece for magnification changes.

Details on tube length, coverglass, and field flatness.

Information on reproduction scale, numerical aperture, and immersion medium.

Phase contrast and immersion objectives.

Attaching object guide and inserting the standard condenser.

Features and use of LK and UKL condensers.

Condensers D 0.80 and D 1.19 for darkfield illumination.

Attaching lamphousing and replacing the lamp.

Steps for focusing, adjusting binocular tubes, and centering diaphragms.

Field/aperture diaphragm control and oil immersion objective handling.

Techniques using condensers 56 and LK for darkfield/phase contrast.

Setup for polarization microscopy using analyser and polariser.

Assembling equipment and managing filter systems for fluorescence.

Method for recognizing fluorochromes using two wavelengths.

Using a measuring eyepiece and specimen micrometer for object measurement.