LELY SHUTTLE XY - Operating Safety; Maintenance Safety

To Next Page

To Previous Page

2-2 Safety

D-H021.1011EN

innovators in agriculture

2.1.3 Operating Safety

• Read and understand this manual, the operator manual of the

milking robot and all safety signs before you connect the SHUTTLE to

the milking robot

• Only trained persons are permitted to operate the SHUTTLE and the

milking robot

• Disconnect the CAN-bus cable before you clean or do maintenance

on the SHUTTLE

• Make sure the cover of the SHUTTLE is closed and secured before you

start the sampling

• Make sure the transport handle is fully in

• Lock the cover with a lock when sampling bottles are in the SHUTTLE

• Keep the cover closed when the fill head moves or when the fill head

is in fill position

• Keep the working area as clean and as dry as possible

• Make sure the transport handle is fully in when the SHUTTLE is in

position

• Make sure the robot arm cannot hit you when you work on the

SHUTTLE

• Make sure the robot arm cannot hit the SHUTTLE

• Make sure the SHUTTLE, the sampling bottles and milk tube are

clean. Clean the SHUTTLE if it is not used for more than three days.

• Contact your nearest Lely service provider if you have any questions

2.1.4 Maintenance Safety