LELY SHUTTLE XY - Print the List of Sample Details; Print the List in T4 C 1; Calculate the 24 H Milk Yield

Operating Instructions 5-11
D-H021.1011EN
innovators in agriculture
3. Select sub-tab 'Post Milking'.
4. Select the cell in the row for the herd or the applicable group
in the column 'Sampling (Yes/No)'.
5. Select 'No'.
6. Select button [Save].
Remove the bottles
1. Remove the second rack (2).
2. Remove the first rack (1).
3. Close the bottles.
4. Remove the sample box from the SHUTTLE.
Close-up
1. Put the milking robot in operation with the X-Link. Refer to the
Operator Manual of the milking robot for more information.
2. Clean the SHUTTLE.
3. Remove the milk tube from the milk tube connection.
5.5 Print the List of Sample Details
5.5.1 Print the List in T4C 1
1. Select survey tab [Reports].
2. Select module tab [Milking].
3. From the tree, select 'Default reports' and 'Lely Milk Sampling'.
4. Enter the start date and time and the end date.
5. Choose the output format.
6. Select button [Make Report].
7. Depending on the output format, you must choose a location to
store the file.
5.5.2 Print the List in T4C 3.0
1. In the navigation bar, select 'Analysis/Reports' and 'Reports'.
2. Select report 'Milking - Milk Sampling'.
3. Print the list.
1. Select button [Print All] to print all cows on the list, or
2. Select the cows to be printed and select button [Print
selected] to print the selection.
4. Choose a printer from the list.
5. Select button [Print].
5.6 Calculate the 24 h Milk Yield