Why is the LELY SHUTTLE XY bottle not filling after the fill command?
The bottle may not be filling because the milk tube is not connected correctly, the sampling cylinder isn't working right, or the SHUTTLE isn't positioned properly. Examine the milk tube and its connections, check the sampling cylinder, and ensure the SHUTTLE's position and height are correct.
What to do if the LELY SHUTTLE XY Music Mixer fill head does not reach the bottle before filling?
If the fill head doesn't reach the bottle, the spindle might be dirty, or the fill head's movement could be obstructed. Clean the spindle with a clean, soft towel. Ensure the fill head can move freely. Another cause might be that the milk time of the milked cow is too short, then no milk sample is taken during this milking. The next time the cow is milked a new attempt is made. If the attention remains, call your local service provider.
What to do if the LELY SHUTTLE XY fill head cannot move down?
If the fill head cannot move down, it might be due to the bottle lid not being fully open, the bottle not being installed correctly, a bent rack, or the SHUTTLE cover not being closed properly. The lid must be between the casings, make sure the bottle is correctly installed, replace the rack with a straight one, and make sure the cover is correctly closed.
What to do if the LELY Music Mixer controller does not get feedback from the X-axis motor?
If the controller isn't getting feedback from the X-axis motor, the rotation sensor (encoder) may be broken, or the fill unit might be stuck. Push the button [STOP/RESET] for a short time. Turn the spindle manually, very slowly (approx. 1 revolution in 2 s). Push and hold button [STOP/RESET] for more than 5 s. Make sure the fill head moves to the home position.
What to do if the LELY SHUTTLE XY Music Mixer controller does not get feedback from the Y-axis motor?
If the controller isn't getting feedback from the Y-axis motor, the rotation sensor (encoder) may be broken, or the fill unit might be stuck. Push the button [STOP/RESET] for a short time. Turn the spindle manually, very slowly (approx. 1 revolution in 2 s). Push and hold button [STOP/RESET] for more than 5 s. Make sure the fill head moves to the home position.
Why is the electrical current too high in the LELY SHUTTLE XY Music Mixer X or Y axis motor?
If the electrical current is too high, the spindle might be dirty, or the fill head's movement could be obstructed, or the milk time of the milked cow is too short. Clean the spindle with a clean, soft towel. Ensure the fill head can move freely. No milk sample is taken during this milking. The next time the cow is milked a new attempt is made. If the alarm remains, call your local service provider.
What to do if the LELY SHUTTLE XY calibration of the X-axis failed?
If the calibration of the X-axis failed, the spindle of the X-axis might be obstructed. Push the button [STOP/RESET] for a short time and remove the obstruction.
What to do if the LELY SHUTTLE XY calibration of the Y-axis failed?
If the calibration of the Y-axis failed, the spindle of the Y-axis might be obstructed. Push the button [STOP/RESET] for a short time and remove the obstruction.
What to do if the LELY SHUTTLE XY fill head cannot move up?
If the fill head cannot move up, it might be obstructed. Push the button [STOP/RESET] for a short time.
What to do if there is no communication signal from the milking robot to the LELY Music Mixer SHUTTLE?
If there is no communication signal, the SHUTTLE might not be activated on the X-Link. Push the button [STOP/RESET] for a short time.
Comprehensive safety guidelines covering operation and maintenance.
Identification and description of the SHUTTLE's main parts.
Explanation of the SHUTTLE's operational procedures and conditions.
Instructions for connecting the SHUTTLE and configuring settings.
Detailed instructions for cleaning all parts of the SHUTTLE.
Explanations and actions for attention codes.
Explanations and actions for alarm codes.
General| Brand | LELY |
|---|---|
| Model | SHUTTLE XY |
| Category | Music Mixer |
| Language | English |
To Next Page