Adjustments
66
10.1 Working depth of hollow discs
DANGER
Risk of accident from freely rotating rollers
Particularly when adjusting the working depth, climbing onto freely
rotating rollers brings a risk of crushing and pinching limbs be-
tween the freely rotating rollers and fixed parts of the implement.
Adjusting work may only be performed by accordingly instructed
personnel.
Never climb onto freely rotating rollers.
DANGER
Risk of accidents due to pivoting rollers
If the guide pins are not secured by the linch pins, the guide pins
can be lost. This results in hazards and malfunctions.
During transportation, the rollers can pivot outwards and exceed
the maximum transport width of three metres. This can cause in-
jury to other road users.
During use, the implement works without depth guiding. This re-
sults in undesirable work results.
After adjusting the working depth secure all guide pins using
linch pins.
DANGER
Loss of components
If the guide pins are not secured, they can fall out due to vibra-
tions in operation. This can result in components being lost during
operation and transportation, and it can cause accidents or dam-
age to the implement and the tractor.
The guide pins must always be secured.
To Next Page