Operation
83
11 OPERATION
11.1 Turning at the headland
DANGER
Risk of damage to components
If the implement is not fully raised, there is a danger that compo-
nents may be damaged during an improper turn at the headland.
Before turning at the headland the implement must be completely raised before
turning-in to avoid any damage to the implement.
Turning at the headland may only be conducted at a speed suitable for the off-
road and ground conditions.
Before turning at the headland
Raise the implement all the way.
After turning at the headland
Lower the implement when driving
straight ahead, at a suitable speed, to
the preset working depth.
11.2 Working speed
A sufficiently high working speed is required to achieve good work
results.
Drive at a working speed of at least 10 km/h so that the soil will
be well crumbled and mixed and can be levelled.
To Next Page
Loading...
