LEMKEN Rubin 9 U + K U - Tightening Torques

Maintenance and repairs
90
13.3 Maintenance intervals
13.3.1 After commissioning (within 2 hours)
Check What to do?
Screw connections
 Retighten all bolts and nuts on the device to the ap-
propriate torque. See section entitled “Tightening tor-
ques”.
13.3.2 Daily check
Check What to do?
Hydraulic hoses
 Check hydraulic hoses for damage and leaks.
 Replace damaged or defective hydraulic hoses im-
mediately.
The hydraulic hoses must be replaced 6 years after the
date of manufacture at the latest. Only used hydraulic
hoses approved by Lemken.
Safety equipment
 Check that all safety equipment is functioning pro-
perly. See "Safety equipment" section.
Soil processing tools
 Check all soil processing tools for damage and wear.
 Replace damaged or worn components.
13.3.3 Weekly check
Check What to do?
Screw connections
 Tighten all screws and nuts on the implement to
the appropriate tightening torque.
 If necessary, secure the screw connections with
screw locking devices.
See section entitled “Tightening torques”.