LEMKEN Rubin 9 U + K U - Page 8

Contents
6
10.5 Rebound harrow..........................................................................................................70
10.5.1 Adjusting the distance ..........................................................................................71
10.5.2 Adjusting the height..............................................................................................72
10.5.3 Adjusting the tilt angle ..........................................................................................73
10.6 Guide plates.................................................................................................................73
10.7 Rollers..........................................................................................................................74
10.7.1 General information.............................................................................................. 74
10.7.2 Lowering depth of the rollers ................................................................................ 75
10.7.3 Blade rollers.......................................................................................................... 76
10.7.4 Pressure load on rollers - Intake behaviour .......................................................... 78
11 Operation .................................................................................................................83
11.1 Turning at the headland.............................................................................................. 83
11.2 Working speed.............................................................................................................83
11.3 Slotted hole for top link ..............................................................................................84
12 Switching off the device.........................................................................................85
12.1 Shutting down the device in an emergency.............................................................. 85
12.2 Disposal .......................................................................................................................85
13 Maintenance and repairs........................................................................................86
13.1 Special safety instructions.........................................................................................86
13.1.1 General................................................................................................................. 86
13.1.2 Personnel qualifications........................................................................................86
13.1.3 Protective equipment............................................................................................86
13.1.4 Immobilise the implement for maintenance and repairs .......................................87
13.1.5 Working on the hydraulics .................................................................................... 87
13.1.6 Working on the electrics .......................................................................................87
13.1.7 Working under the raised device ..........................................................................88
13.1.8 Utilised tool...........................................................................................................88
13.2 Environmental protection...........................................................................................89