18
• Select a photo with 640 x 400 up to 1280 x 800 pixel resolution.
• Photo format supported are PNG (recommended), JPG, JPEG,
GIF and BMP. On Apple IOS mobile devices the le format
HEIC is supported.
• Maximum le size is 20 MB. Larger photos may take longer to
upload to the display. Photo lename CANNOT have spaces or
special characters.
» Select Photo
• Return to the thermostat and go to menu > settings > display
> screen saver.
• Select photo and a screen will appear asking you to either
accept or reject the photo.
• Accept it to make the photo your screen saver image.
• Repeat the above procedures for any additional E30 or S30
thermostats available through your web portal or mobile app.
» Delete Photo
• Return to the thermostat and go to menu > settings > display
> screen saver.
• Select photo and a screen will appear asking you to either
accept or reject/delete the photo.
• Select reject/delete.
» Replace Photo
• Return to the thermostat and go to menu > settings > display
> screen saver.
• Select photo and the new photo will appear and you will be
prompted to reject /delete, or accept.
• Select accept.
NOTE: If photo option is selected for screen saver but no photo is uploaded or
has been deleted, then the system will display the Lennox logo.
7. Screen Brightness - Options are ON or OFF.
• If set to ON, control of screen brightness is automatically controlled by
the system.
• If set to OFF, screen brightness can be adjusted using the sliding scale
adjustment tool.
8. Temp Scale - User can set to either Fahrenheit or Celsius temperature
display.
9. Clean Screen - Locks the screen and allows user 30 seconds to clean the
screen. During this period, the screen will not respond to any input.
Home Info
Adding Home Information
This screen allows you to add your home information. Fields included are home
name, country/region, address, address2, city, state and zip/postal code.
Remove Home
Using “remove home” function will remove all addresses and thermostat
systems associated with your account.
To remove just one system, go to that system and navigate to menu > name
and select “unregistered system.”
NOTE: The remove home function does not delete your account but just
removes all systems and addresses.
Account
The account screen will allow the user to setup an account so they may access
their system remotely from the consumer portal. Reasons to create an account:
• To enable remote access to the system using a mobile device with the
iComfort Thermostat App installed. This will allow remote adjustment for
temperature settings and other features.
• To enable the Smart Away feature discussed later in this instruction.
• To directly communicate to the dealer any issues the system may be incurring.
This menu allows four options:
Using Existing Account
If an iComfort account has already been created, then use the sign in option to
access your account. Enter your email address and password to connect your
system to your on-line account.
Creating a New Account
1. Use this option to create an account. Enter your email address and desired
password. Select create new account.
2. The new account screen will appear. Enter your rst name, last name and
phone number (optional).
3. Enter an email address and repeat to verify.
4. Create a password under the set password location. Retype the password
to verify.
5. Check the box that will allow your dealer to receive service alerts and
possibly x your issue remotely (recommended).
6. Check that you agree to the Lennox EULA. Press on LENNOX EULA to
read the end-user license agreement.
To Next Page
Loading...
Need help?
General
