-00
66
CONSOLE GRAPHIQUE KP07
III.10. Fault log
The event log can be used, depending on the configuration chosen in the console application program, to
record :
• either the last 24 fault occurrences
• or the last 24 fault occurrences and clearances .
The log displayed relates only to the controller which is currently in communication with the display unit. If other
KP01 cards are linked to this display unit, their respective event logs can be accessed by modification of the
controller number in the summary screen (see § III.1.).
III.11. On / off switches on refrigeration circuits
This screen can be used to configure authorisation to switch on each refrigeration circuit, or to keep it switched
off, using "modification" mode.
To Next Page
Loading...
