Energence
®
Packaged Gas / Electric 45.7 to 88 kW - 50 Hz/ Page 5
COOLING SYSTEM (continued)
•
•
•
•
extrusion tube
•
• Improved heat transfer performance due to high primary
•
• High durability
•
•
•
• Reduced unit weight
•
• Face split design
• Mounting brackets with rubber inserts
•
•
•
• Flared shoulder tubing connections
• Silver soldered construction
• Factory leak tested
•
• Plastic pan with positive slope
• Side or bottom drain connections
•
•
• Permanently lubricated ball bearings
• Shaft up
•
•
FF
GG
• Specify nominal cooling capacity of the unit
Factory Installed
•
•
• Flared shoulder tubing connections
• Silver soldered construction
• Fully serviceable brass valves installed in discharge &
liquid lines
NOTEEnviron™
System or Humiditrol
®
Factory or Field Installed
• Field installed only
• May be factory enclosed to ship with unit
•
• Monitors condensate level in drain pan
• Shuts down unit if drain becomes clogged
FEATURES AND BENEFITS
To Next Page
Loading...
