Do you have a question about the Lennox EL16XC1-036-230A01 and is the answer not in the manual?
Refrigerant | R-410A |
---|---|
Phase | 1 |
Type | Air Conditioner |
Cooling Capacity | 36000 BTU |
Compressor Type | Single Stage |
Warranty | 5-Year Limited Warranty on Parts |
Stages | 1 |
Voltage | 230V |
Lennox EL16XC1 air conditioner with R-410A refrigerant, SEER up to 17.90.
Breakdown of model number components and their meanings.
Details limited warranty for compressor and other covered components.
Lists AHRI, Energy Star, ETL certifications, and quality system registration.
Describes unit applications with indoor coils, air handlers, and installation notes.
Describes R-410A refrigerant as ozone-friendly and notes unit pre-charge.
Details the direct drive fan, vertical discharge, and motor protection features.
Features of the fortified aluminum alloy coil for superior corrosion resistance.
Explains refrigerant metering using RFCIV systems and orifice sizing.
Details the high efficiency, quiet operation, and two-scroll compression design.
Lists accessories like Crankcase Heater, Hard Start Kit, Low Ambient Cut-Off.
Discusses thermostat requirements and compressor lock-out thermostats.
Details tonnage, connections, refrigerant charge, outdoor coil, and fan specifications.
Provides line voltage, overcurrent protection, circuit ampacity, and compressor/fan motor data.
Table showing sound power levels in dB for various center frequencies by unit model.
Provides a wiring diagram for disconnect switch, thermostat, and control box connections.
Specifies required clearances for service, sides, top, and between units.
Provides dimensions in inches and millimeters for the small base section.
Provides dimensions in inches and millimeters for medium and large base sections.
Table for matching outdoor units with indoor coils/air handlers and factory/replacement TXVs.
Lists common pairings of outdoor units with indoor units.
Explains how cooling/heating capacities and power input are calculated.
Directs users to the AHRI website for the most current system match information.
Detailed table listing system matches with model numbers, expansion devices, capacity, SEER, EER, coils, furnaces, and AHRI references.
Lists revisions made to the document, such as updated optional accessories.