Page 94 - IOM / ROOF-TOP FLEXY™ Series
THE MACRO PAGE
This page enables you to modify all the units on your site in
one action.
You can choose to perform one or more actions.
Modify the value or values you want to submit.
The standard Macros are :
- Adjust the Comfort thermostat
- Set to Night mode
- Set fresh air to the minimum
- Set the time on the Climatic boards.
THE HISTORY PAGE
This page is provided in addition to the individual history you’ve
already seen in the User page. It tells you when local
communication starts and stops, and gives you the users’
access codes.
This is a read-only page. The history is automatically cleared
to ensure refreshment doesn’t take too long.
This page will also show units faults.
To create a new user : Click on name
Click on “Submit”
Select “Entire site”
control interface CLIMALINK / CLIMALOOK
THE ACCESS PAGE
This page enables users who have a third level access code
to attribute access codes to other users.
The acccess code 999 is your first access code. Remember
to delete it once you have created your own access codes.
Use the virtual keyboard on the task bar
Use the keyboard to enter the name, password (maximum of
4 digits) and the access level.
1 =use of the User, Schedule, Macro and History pages.
2 =same level, plus the Service page.
3 =same level, plus the Access page.
To Next Page
Loading...