• 100 •
DC60-DM60_ROOFTOP-IOM-1307-E
DISPLAY DM60
Setup menus
Access to the setup menus is protected by a password. The password must be entered digit by digit. If the password is correct, the
lock opens, and the selection of the function choice is active.
• Pressing the 'alarm' button directs you to alarm list display.
• Pressing the 'esc' button takes you to the main display.
• Pressing the 'arrow' button increases the password digit value or selects the previous function.
• Pressing the 'enter' button it puts you on the next digit password, or directs you to the selected function screen.
• Pressing the 'down arrow' button decreases the password digit value or selects the next function.
Setting; Temperature
• Pressing the 'alarm' button directs you to alarm list display.
• Pressing the 'esc' button directs you to rooftop menus setup display.
• Pressing the 'up arrow' button increases the set point value.
• Pressing the 'enter' button commits the changes then it puts you on the next or previous setpoint.
• Pressing the 'down arrow' button decreases the set point value.
View/edit, the current schedule mode of the heating mode setpoint
View/edit, the current schedule mode of the cooling mode setpoint
To Next Page
Loading...
Need help?
General