Lennox iComfort M30 - System Configuration and Security; Dealer Information and Access; Screen Lock and Security; Date, Time, and Language Settings

26
Table 6. Parameter Descriptions
Parameter Name Denition
Offset
There are two options for offset which are:
• Temperature offset can be used to offset the displayed space temperature by up to +/- 5 degrees. The
default temperature offset is zero. This offset also applies to the control temperature.
• Humidity offset can be used to offset the displayed room humidity by up to +/- 10%, the default offset is
0.
Stage Control
The following gures list typical congurations.
H/C
Stages
Locked =
YES
H/C
Stages
Locked =
NO
POINTS:
2nd stage
ON
2nd stage
OFF
1st stage
ON
1st stage
OFF
2nd stage
ON
2nd stage
OFF
1st stage
ON
1st stage
OFF
SP -1.5 SP -1.0 SP -0.5
SP
SP +1.5SP +1.0 0.2+ PS5.0+ PS
Stg1 Differential
Stg2 Differential
Stg2 Differential
Stg1 Differential
Figure 2. Cooling - 1 or 2 stages