icomfort™ Communicating Control System / Page 7
FEATURES
INSTALLER SETUP
SYSTEM DISCOVERY
SYSTEM DISCOVERY IN PROGRESS
tests
Thermostat 1
Use this Thermostat?
press here
PLEHputes
After power is applied to the thermostat for the rst
time, it checks the system for installed communicating
devices, the “System Discovery” progress screen is
displayed on the thermostat; followed by the “Use this
thermostat?” screen.
Active
Critical Alert Code: 31
AIR HANDLER reports:
Lost Communication with
THERMOSTAT −
Latest occurrence: 8/23/09
1:57 PM
press for more
critical alert
close
During the setup process, alerts may be displayed to
inform the installer of any information that affects the
setup process.
SETUP - SYSTEM SETTINGS
edit
next step
back
PLEHputes
Time and Date
Daylight Saving
Time
Circulate Fan ON
time
Dealer Name
Dealer Address
Dealer Phone
Number
Dealer Email
To view/edit a setting,
highlight it, then press edit.
Current Value:
(35%)
system settings
Use the up / down arrows to scroll through available
settings. Right side of screen displays the current value
of each setting.
Installer System Settings and Default Setting
System
Setting
Range /
Condition
Default
Setting
Modify
with
Time and Date Time and Date Screen and arrow buttons
(see example)
Daylight Saving
Time
Enabled/
Disabled
Enabled Up / Down
Arrows
Circulate Fan ON
Time
15 to 45% 35%
Dealer Name alpha-
numeric
characters
Lennox Keyboard
tool
Dealer Address - - -
Dealer Phone
Number
1-800-9-LENNOX
Dealer Email - - -
Dealer Website www.lennox.com
Time and Date Screen
adjust
Time and Date
10 :19 AM
Oct 15 2009
save
cancel
PLEHputes
To Next Page
Loading...
