EasyManua.ls Logo

Lennox LCT240H

Lennox LCT240H
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2022
WARNING
Improper installation, adjustment, alteration, ser
vice or maintenance can cause property damage,
personal injury or loss of life. Installation and ser
vice must be performed by a licensed professional
HVAC installer or equivalent, service agency, or the
gas supplier
CAUTION
As with any mechanical equipment, contact with
sharp sheet metal edges can result in personal in
jury. Take care while handling this equipment and
wear gloves and protective clothing.
Table of Contents
Dimensions Page 2.................................
Parts Arrangements Page 5.........................
Shipping and Packing List Page 6....................
General Page 6....................................
Unit Support Page 7................................
Duct Connection Page 8............................
Rigging Unit For Lifting Page 8.......................
Condensate Drains Page 8..........................
Gas Piping Page 9.................................
Pressure Test Gas Piping Page 9.....................
High Altitude Derate Page 10.........................
Download Mobile Service App Page 10.................
Electrical Connections - Power Supply Page 11.........
INSTALLATION
INSTRUCTIONS
LGT/LCT156H
LGT/LCT180H
LGT/LCT210H
LGT/LCT240H
LGT/LCT300S
(13 Ton)
(15 Ton)
(17.5 Ton)
(20 Ton)
(25 Ton)
ROOFTOP PACKAGED UNITS
508288-01
9/2022
Electrical Connections - Control Wiring Page 12.........
Blower Operation and Adjustments Page 13............
Cooling Start-Up Page 20............................
Temperature Thermistor Sensors Page 51..............
Gas Heat Start-Up Page 58...........................
Heating Operation and Adjustments Page 59............
Electric Heat Start-Up Page 59........................
Multi-Staged Air Volume Start-Up Page 60..............
Multi-Staged Air Volume & VAV Operation Page 62......
Hot Gas Reheat Start-Up Page 73.....................
Service Page 77....................................
Unit Controller Parameter Settings Page 82.............
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Use this QR code to download the mobile service app. Follow the prompts
to pair the app with the unit control system and configure the unit. Refer to the
“Download Mobile App” section in this manual and the Setup Guide provided
with this unit. The QR code is also available in the unit control area.
The app can be downloaded from the appropriate iOS or Android store.
Look for the following icon.
Attention!
Question and Answer IconNeed help?

Do you have a question about the Lennox LCT240H and is the answer not in the manual?

Lennox LCT240H Specifications

General IconGeneral
BrandLennox
ModelLCT240H
CategoryAir Conditioner
LanguageEnglish

Summary

Rooftop Packaged Units

Installation Instructions Overview

General overview of the installation process for rooftop packaged units.

Unit Dimensions

Gas Piping Installation

Connect Gas Piping

Guidelines for connecting the gas supply, including code requirements.

Pressure Test Gas Piping

Procedures for testing gas piping for leaks.

Altitude and App Information

Electrical Connections - Power Supply

Wiring Routing and Connection

Instructions for routing field wiring and making power supply connections.

Electrical Connections - Control Wiring

Blower Operation and Adjustments

Determining Unit CFM

Procedures for measuring and adjusting blower speed for specified CFM.

Blower Belt and Pulley Adjustments

Instructions for adjusting belt tension, pulley alignment, and checking belt tension.

Cooling Start-Up Procedures

Start-Up Sequence

Step-by-step procedure for starting the cooling operation.

Refrigerant Charge and Check

Charge and Check Procedures

Detailed instructions for checking and adjusting refrigerant charge using pressures and temperatures.

Compressor and Fan Controls

Prognostic Sensors

Explains the role and placement of temperature sensors for system monitoring and protection.

Gas Heat Start-Up and Operation

Placing Unit In Operation

Safe procedures for placing gas units into operation and lighting burners.

Hot Gas Reheat Operation

UVC Light Installation and Maintenance

Unit Controller Settings

Factory Settings and Configuration

Overview of factory controller settings, parameters, and configuration IDs.

Configuration ID 1 Details

Configuration ID 1 Settings

Explanation of configuration ID settings for various unit options and features.

Configuration ID 2 Details

Configuration ID 2 Settings

Explanation of configuration ID settings for various unit options and features.

START-UP REPORT

Related product manuals