Page 88
Menu Interface Details
The following tables indicate the major levels of the menu interface. Many of these options have more levels which are
described in the following sections that detail DATA, SETUP, SERVICE, and SETTINGS.
Use the SELECT button to progress to the next menu level (i.e. level 1 to level 2).
Use the SCROLL arrows ▲▼ to move (scroll) within a menu level.
Use the BACK button to return to the previous menu level.
Use the Adjust and set value arrows ▲▼ to change values of selected item.
Table 57. Menu Interface (Level 1 - DATA)
Level 2 Level 3 Level 4 Level 5
HISTORY
ALARMS
CLEAR ALARM HISTORY = NO OR YES
LAST SERVICE (TIME STAMP OF LAST SERVICE)
IN/OUPUTS
SENSORS
THERMOSTAT
G: ON/OFF
W1: ON/OFF
W2: ON/OFF
Y1: ON/OFF
Y2: ON/OFF
BLOWER SPEED: X
OAT: XX F
RAT: XX F
DAT: XX F
ZAT (A2): XX F
C02: XX PPM
RH: XX %
IE
OE
GLO: ON/OFF
OCP: ON/OFF
SMOKE: ON/OFF
D12: ON/OFF
D13: ON/OFF
REHEAT D14: ON/OFF
OUTPUTS
(NOTE: COMPONENTS ARE ONLY
DISPLAYED IF INSTALLED.)
COMPRESSOR 1: ON/OFF
COMPRESSOR 2: ON/OFF
BLOWER: ON/OFF
EXHAUST: ON/OFF
FAN 1: ON/OFF
FAN 2: ON/OFF
HEAT 1: ON/OFF
HEAT 2: ON/OFF
REHEAT COIL 1: ON/OFF
REHEAT COIL 2: ON/OFF
SERVICE RELAY: ON/OFF
LCD HEATER: ON/OFF
FACTORY
SOFTWARE VERSION
RTU DESCRIPTION
CATALOG NUMBER
MODEL NUMBER
SERIAL NUMBER
CONFIGURATION ID 1
CONFIGURATION ID 2
NETWORK
BACNET
MAC ADDRESS: XXX
BAUD RATE: XXXXX
DEVICE INSTANCE: X
LONTALK
PROGRAM ID
NEURON ID
L-CONNECTION LCONN ADDRESS: X
To Next Page
Loading...
Need help?
General
