Lennox VRF VEWCL1B

22
Table 5.1 Parameters viewing list
Parameter
code
Parameter
name
Parameter
range
Viewing method
C00
Entrance of
adjustable
parameter
--
In “C00” status, Timer zone shows the current indoor
unit project number. When one wired controller is
controlling multiple indoor units, then only the
smallest project number will be displayed.
C01
View the
project
number of
indoor unit
and locate
the faulted
indoor unit
1-255;
Project
number of
online
indoor unit
Operation method:
Enter viewing, press MODE button in “C01” status to
enter the interface of viewing indoor unit project
number. Press “ ” or “ ” button to select the
project number of indoor unit.
Display method:
Temperature zone: displays error codes of the
current indoor unit( The temperature zone will
display the error codes in turn with an interval of 3
seconds if there are several malfunctions in one
indoor unit.)
Timer zone: displays present indoor unit project
number /C5 malfunction of project number conflict
Note:
1) If master indoor unit exists in current indoor unit
network, “MASTER” icon will be bright under “C01”
interface. After entering the interface of viewing
project number, “MASTER” icon will be bright only
when the project number of master indoor unit is
selected.
2) System will not exit “C01” viewing automatically.
User has to exit this interface manually.
C03
View the
indoor unit
quantity of
the system
network
1-80
Timer zone: display indoor unit quantity of the
system
Wired Controller VEWCL1B