33
Note:
① the available modes are different for different models, the wired controller will
automatically select mode setting range according to the model of indoor
unit.
② The Auto mode can be only set at the master indoor unit.
③ Under Auto mode, if the indoor unit is running under Cooling, the icons“ ”
and “ ” will light up; if the indoor unit is running under Heating, the
icons“ ” and “ ” will light up.
6.3 TEMPERATURE SETTING
Pressing “ ” or “ ” button in On status increases or decreases set
temperature by 1°C or 1 ; holding “ ” or “ ” button increases or decreases set
temperature by 1°C or 1 every 0.3s.
In Cooling, Fan, Heating, Floor Heating, 3D Heating or Space Heating mode,
temperature setting range is 16°C~30°C or 61 ~86 .
In Dry mode, the temperature setting range is 12°C or 54 , 16°C~30°C or
61 ~86 . In Dry mode, when temperature is 16°C or 61 , continuously press
“ ” button twice to decrease temperature to 12°C or 54 (when save function is
activated, the temperature in Dry mode can’t be adjusted to 12°C or 54°F and the
setting range is “lowest temperature in Save mode” ~ 30°C or 86 ).
Note:
① Under Auto mode or Absence function is activated, the setting temperature
Wired Controller VEWCL1B
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
To Next Page
Loading...
