Lennox VRF VEWCL1B

38
Fig. 6.6 Timer Off setting in unit On status in Fahrenheit
6.5.2 Clock Setting
Clock display: when the timer setting way is clock timer, timer zone displays
system clock in unit On and Off status.
“ ”
icon is bright and the clock can be
set at this time.
Clock setting: long press TIMER button for 5s to enter clock setting and
“ ”
icon is blinking. Pressing “ ” or “ ” button increases or decreases clock
time by 1min; holding “ ” or “ ” button for 5s increases or decreases clock time
by 10min; Press ENTER/CANCEL button or TIMER button to save the setting and
then exit setting.
Wired Controller VEWCL1B