Server model with two PCIe slots
The following illustration shows the rear view of the server model with two PCIe slots. Depending on the
model, your server might look slightly different from the illustration below.
Table 6. Components on the rear of the server
1 Ethernet connectors on OCP 3.0 Ethernet adapter
2 Network management interface
3 USB 3.0 connector 4 VGA connector
5 NMI button 6 Power supply 1
7 Power supply 0 8 Rear wall bracket
9 PCIe slot 2 10 PCIe slot 1
Note: For more information about each component, see “Rear components overview” on page 16.
14
HR630X V2 User Guide
To Next Page
Loading...
