Lenovo TAB3 7 Plus - Page 45

LenovoTAB37Plus
41
Figure8.Removalstepsofmainboard(continued )
Usetweezerstogentlypryupthesidebutton’smetalpiece,separatethemetal
piecefromthefrontofthecase.
UseaPhillipsscrewdrivertoremovethetwoscrewsholdingthemainboardin
place. Then remove the main board.
Note:theFPCAsidebuttonandmotorare
connectedtothefrontcasebydouble‐sided
adhesion;makesuretoprythemapartcarefully.
IfyouneedtoremovetheFPCAsidebutton,useasolderingirontoremovethesolder
connectionfromthemainboard.
Step Screw (quantity) Color Torque
M1.4X2.4(2) Silver 0.7N
1