Table 1. Server specifications (continued)
Specification
Description
Input/Output (I/
O) features
• Front panel:
– One VGA connector (available on some models)
– One XClarity Controller USB 2.0 connector
– One USB 3.0 connector
• Rear panel:
– One VGA connector
– Two USB 3.0 connectors
– One XClarity Controller network connector
– Two or four Ethernet connectors on the LOM adapter (available on some models)
– One serial port (available on some models)
System fans
• One processor: five dual-rotor hot-swap fans (including one redundant fan rotor)
• Two processors: seven dual-rotor hot-swap fans (including one redundant fan rotor)
Notes:
• For server models installed with Intel Xeon 6144, 6146, 6154, 8168, 8180, and 8180M
processors, fan rotor redundancy function is not supported. If one fan rotor fails, the server
performance will be degraded.
• If your server comes with only one processor, five system fans (fan 1 to fan 5) are adequate to
provide proper cooling. However, you must keep the locations for fan 6 and fan 7 occupied by a
fan filler to ensure proper airflow.
Power supplies One or two hot-swap power supplies for redundancy support
• 550-watt ac 80 PLUS Platinum
• 750-watt ac 80 PLUS Platinum
• 750-watt ac 80 PLUS Titanium
• 1100-watt ac 80 PLUS Platinum
6 User Guide for ThinkAgile HX1321 Node ThinkAgile HX3321 Node
To Next Page
Loading...
