Figure 12. Shipping bracket removal
To install the shipping bracket, align the two handles 1 with the system error LED hole and system ID LED
hole and insert the shipping bracket into the rear of the server until it is firmly installed.
Figure 13. Shipping bracket installation
Rear view LEDs
The rear of the server provides system ID LED, system error LED, Ethernet LEDs, and power supply LEDs.
The following illustration shows the LEDs on the rear view of server models with three PCIe slots. The LEDs
on the rear view of other server models are the same.
22
User Guide for ThinkAgile HX1321 Node ThinkAgile HX3321 Node
To Next Page
Loading...
