Lenovo ThinkServer RD240 - Completing Hardware Replacement

6.ConnecttheminiSASsignalcablestotheRAIDcontroller.
Note:Usethe400mm(15.75inches)miniSASsignalcable.
Figure48.ConnectingtheminiSASsignalcablestotheRAIDcontroller
1Ports0-3
2Ports4-7
a.ForoneminiSASsignalcable,connecttheendtotheports0-3ontheRAIDcontroller.
b.FortheotherminiSASsignalcable,connecttheendtotheports4-7ontheRAIDcontroller.
7.PositiontheRAIDcontrollerneartherisercardassembly.EnsurethattheleftedgeoftheRAIDcontroller
isinsertedintothenotchoftheRAIDcardretentionbracket
1,andthenrmlyinserttheRAIDcontroller
straightdownintothePCIcardslot12untilitissecurelyseated.Theninstallthescrew3tosecurethe
RAIDcontroller.
Figure49.InstallingtheRAIDcontrollerintothePCIcardslot1ontherisercardassembly
Note:TherearethreePCIcardslotsontherisercardassemblyasshownintheillustration.ThePCI
cardslot12isforRAIDcardsonly.FormoreinformationaboutthePCIcardslots,see“Installinga
PCIcard”onpage39.
8.InstalltherisercardassemblywiththeRAIDcontrollerintoanappropriatePCIcardslotonthesystem
board.
Chapter5.Installing,removing,orreplacinghardware55