Lenovo ThinkServer RD240 - Chapter 6. Configuring the Server; Setup Utility Program; LSI SAS Controller Configuration; 8708 ELP SAS RAID Controller Configuration

2.Removetheservercover.See“Removingtheservercover”onpage21.
3.Placethemicroprocessorfanductovertheheatsink(s)andinsertthethreeplastictabsononeside
oftheductwiththecorrespondingholesinthechassis.Then,carefullypivottheothersidedown
toinstalltheductinplace.
4.Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage71.
Removingorinstallingthepowersupply
Thissectionprovidesinstructionsonhowtoremoveorinstallthepowersupply.
Removingthepowersupply
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstandingthe“Safetyinformation”
onpageiii
and“Guidelines”onpage19.
Thissectionprovidesinstructionsonhowtoremovethepowersupply.
Whenyouremoveapowersupply,observethefollowingprecautions.
CAUTION:
Hazardousmovingparts.Keepngersandotherbodypartsaway.
Statement8
CAUTION:
Neverremovethecoveronapowersupplyoranypartthathasthefollowinglabelattached.
Hazardousvoltage,current,andenergylevelsarepresentinsideanycomponentthathasthislabel
attached.Therearenoserviceablepartsinsidethesecomponents.Ifyoususpectaproblemwith
oneoftheseparts,contactaservicetechnician.
Toremovethepowersupply,dothefollowing:
Chapter5.Installing,removing,orreplacinghardware59