Lenovo ThinkServer RD240 - Removing or Installing the Microprocessor Fan Duct

Removingorinstallingthemicroprocessorfanduct
Thissectionprovidesinstructionsonhowtoremoveorinstallthemicroprocessorfanduct.
Removingthemicroprocessorfanduct
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstandingthe“Safetyinformation”
onpageiii
and“Guidelines”onpage19.
Thissectionprovidesinstructionsonhowtoremovethemicroprocessorfanduct.
Toremovethemicroprocessorfanduct,dothefollowing:
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Removetheservercover.See“Removingtheservercover”onpage21.
3.Slidethemicroprocessorfanductalittlebitbackwardtoreleasethethreeplastictabsfromthechassis.
Then,liftthemicroprocessorfanductoutofthechassis.
Figure51.Removingthemicroprocessorfanduct
4.Toinstallthemicroprocessorfanduct,see“Installingthemicroprocessorfanduct”onpage58.
Installingthemicroprocessorfanduct
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstandingthe“Safetyinformation”
onpageiiiand“Guidelines”onpage19.
Thissectionprovidesinstructionsonhowtoinstallthemicroprocessorfanduct.
Toinstallthemicroprocessorfanduct,dothefollowing:
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
58ThinkServerUserGuide