Notes:
•UseanydocumentationthatcomeswiththeTMMPremiumandfollowthoseinstructionsinadditionto
theinstructionsinthistopic.
•IfyouremovetheTMMPremium,theiKVMfunctionforserverremotemanagementwillbeunavailable.
•Dependingonthemodel,yourservermightlookslightlydifferentfromtheillustrationinthistopic.
ToremovetheTMMPremium,dothefollowing:
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Iftheserverisinstalledinarackcabinet,removetheserverfromtherackcabinetandplaceitonaflat,
clean,andstatic-protectivesurface.SeetheRackInstallationInstructionsthatcomeswiththeserver.
3.Removetheservercover.See“Removingtheservercover”onpage75.
4.LocatetheTMMPremiumonthesystemboardandthenlifttheTMMPremiumstraightuptoremove
itfromtheconnector.
Figure61.RemovingtheTMMPremium
5.IfyouareinstructedtoreturntheoldTMMPremium,followallpackaginginstructionsanduseany
packagingmaterialsthataresuppliedtoyouforshipping.
Chapter6.Installing,removing,orreplacinghardware107
To Next Page
Loading...
