Lenovo ThinkServer RD440 - Installing Drivers for a Red hat Enterprise Linux as 6.5 Operating System; Installing the Vmware Esxi 5.1 Update 1 Hypervisor

25.Aftertheinstallationiscompleted,clickReboottorestartyourserver.
26.Theinstallationcontinuesaftertheserverrestarts.IntheWelcomewindow,clickForward.
27.ClickYes,IagreetotheLicenseAgreementandthenclickForward.
28.IntheSetUpSoftwareUpdateswindow,configurethesettingsasyouneed,andthenclickForward.
29.IntheFinishUpdatesSetupwindow,clickForward.
30.SetyourusernameandpasswordandthenclickForward.
31.SetyourtimeanddateandthenclickForward.
32.IntheKdumpwindow,selectEnablekdumpifyouwanttoenablekdump,andthenclickFinish
tocompletetheinstallation.
Note:Whenpromptedtorestarttheserver,clickYes.
33.Followtheinstructionsonthescreentologintotheoperatingsystem.
InstallingdriversforaRedHatEnterpriseLinuxAS6.5operatingsystem
ThistopicprovidesinstructionsonhowtoinstalldriversforaRedHatEnterpriseLinuxAS6.4(x64or
x86)operatingsystem.
Note:ThedriversforanEthernetcard,anHBAcard,andaCNAcardareinstalledduringtheoperating
systeminstallation.
Toinstallthedriverforanonboardgraphicscard,dothefollowing:
1.DownloadthedriverforonboardgraphicscardfromtheLenovoWebsitetoaUSBstoragedevice.The
mostup-to-datedevicedriversforvariousservermodelsarealwaysavailableontheLenovoWebsiteat:
http://www.lenovo.com/drivers
2.Double-clicktheEXEfiletounzipittoafolder.Then,connecttheUSBstoragedevicetoyourserver.
3.LogintotheoperatingsystemandcopythefolderfromyourUSBstoragedevicetothe/tmpdirectory
onyourserver.
4.Usethefollowingcommandstoinstallthedriver:
cd/tmp
cd/xorg71
./update.sh
Note:Inthecommandlines,xorg71representsthenameofthedriverpackagefile.Usethe
correspondingfilenameonyourserver.
5.Restartyourserver.
InstallingtheVMwareESXi5.1Update1hypervisor
ThistopicprovidesinstructionsonhowtoinstalltheVMware5.1Update1hypervisor.
Notes:
•TheVMwareESXi5.1Update1hypervisorisnotsupportedononboardsoftwareRAIDconfiguration.
•Followtheinstructionsonthescreeninadditiontotheinstructionsinthistopic.
ToinstalltheVMwareESXi5.1Update1hypervisor,dothefollowing:
1.Inserttheinstallationdiscintotheopticaldrivethatyouhavesetasthefirststartupdevice.Then,
starttheserverfromtheopticaldrive.
2.WhenthemessagePressTabtoeditoptionsisdisplayed,youcanpressTabandtheneditoptions
asyouneed.Thefollowingstepsarebasedonthescenariothatyouhavewaitedforaroundeight
Chapter2.Installinganoperatingsysteminlegacymode39