7.Removethetwoscrewsthatsecurethefailingrisercard.Then,removethefailingrisercardfrom
thebracket.
Figure60.Removingtherisercard
8.Touchthestatic-protectivepackagethatcontainsthenewrisercardtoanyunpaintedsurfaceonthe
outsideoftheserver.Then,removethenewrisercardfromthepackage.
9.Alignthescrewholesinthenewrisercardwiththecorrespondingonesinthebracket.
Figure61.Installingtherisercard
Chapter6.Replacinghardware93
To Next Page
Loading...
