Lenovo ThinkServer RD650 - Completing the Parts Replacement

17.Pressthesystemboardtotherearoftheserver.Ensurethat:
•Therearconnectorsonthesystemboardareinsertedintothecorrespondingholesintherearpanel.
•Thesystemboardisconnectedtothepowerdistributionboard.
Note:Toshowthemainpartsclearly,notallcomponentsareillustratedinthefollowingfigure.
Figure207.Connectingthesystemboardtothenewpowerdistributionboard
18.Reconnectthepowercablestothenewpowerdistributionboard.
19.Reinstallanypartsthatyouhaveremovedinthereversedsequenceinwhichyouremovethem.Referto
therelatedtopicsin“Installing,removing,orreplacinghardware”onpage77.
20.Ifyouareinstructedtoreturntheoldpowerdistributionboard,followallpackaginginstructionsand
useanypackagingmaterialsthataresuppliedtoyouforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletethereplacement,goto“Completingthepartsreplacement”onpage206.
Completingthepartsreplacement
Thistopicprovidesinstructionstohelpyoucompletethepartsreplacementandturnonyourserver.
Tocompletethepartsreplacement,youmustproperlyroutethecablesinsidetheserver,reinstalltheserver
cover,reconnectalltheexternalcablesand,forsomedevices,updatethefirmwareandruntheSetupUtility
programtodofurthersetup.
Reinstallingtheservercoverandreconnectingcables
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Readthisfirst:safety
information”onpagevand“Guidelines”onpage73.
Attention:Forpropercoolingandairflow,reinstalltheservercoverbeforeturningontheserver.Operating
theserverwiththeservercoverremovedmightdamageservercomponents.
Beforeyoubegin,printalltherelatedinstructionsorensurethatyoucanviewthePDFversiononanother
computerforreference.
206ThinkServerRD650UserGuideandHardwareMaintenanceManual