6.LoosenthescrewthatsecurestheAnyFabricadapter.PulltheAnyFabricadaptertotherearoftheserver
todisconnectitfromthesystemboard.Then,removetheAnyFabricadapterfromtherearoftheserver.
Note:CarefullyhandletheAnyFabricadapterbyitsedges.
Figure110.RemovingtheAnyFabricadapter
7.IfyouareinstructedtoreturntheoldAnyFabricadapter,followallpackaginginstructionsanduseany
packagingmaterialsthataresuppliedtoyouforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheremovalprocedure,goto“Completingthepartsreplacement”onpage206.
Installingorreplacingahot-swapredundantpowersupply
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Readthisfirst:safety
information”onpagevand“Guidelines”onpage73.
Thehot-swapredundantpowersupplieshelpyouavoidsignificantinterruptiontotheoperationofthe
systemwhenapowersupplyfails.Youcaninstallorreplaceapowersupplywithoutturningofftheserver.
CAUTION:
Hazardousmovingparts.Keepfingersandotherbodypartsaway.
CAUTION:
Neverremovethecoveronapowersupplyoranypartthathasthefollowinglabelattached.
Chapter6.Replacinghardware137
To Next Page
Loading...
