b.Pressthereleasetab1inthedirectionasshownandcarefullypullthehandle2atthesametime
toslidethefailingpowersupplyoutofthechassis.
Figure112.Removingapowersupply
2.Touchthestatic-protectivepackagethatcontainsthenewpowersupplytoanyunpaintedsurfaceon
theoutsideoftheserver.Then,removethenewpowersupplyfromthepackage.
3.Notetheorientationofthenewpowersupplyandthenslideitintothechassisuntilitsnapsintoposition.
Figure113.Installingapowersupply
4.Connectthepowercordtothepowercordconnectoronthenewpowersupply.Then,checkthe
statusLEDsnearthepowercordconnector.ForinformationaboutthestatusLEDs,see“Powersupply
statusLEDs”onpage57.
5.Ifyouareinstructedtoreturntheoldpowersupply,followallpackaginginstructionsanduseany
packagingmaterialsthataresuppliedtoyouforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletethereplacement,goto“Completingthepartsreplacement”onpage206
.
Installingorreplacingaheatsink
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Readthisfirst:safety
information”onpagevand“Guidelines”onpage73.
Chapter6.Replacinghardware139
To Next Page
Loading...
