Chapter 4. Install and set up 12 and 24-drives
4.1. Prepare for installation
Follow these steps to prepare for installation of your DE6000H (2U24), DE6000F,
DE4000F, DE2000H/DE4000H (2U12), DE2000H/DE4000H (2U24), DE120S, or
DE240S series storage system.
Steps
1.
Create an account and register your hardware at
datacentersupport.lenovo.com/.
2.
Ensure that the following items are in the box that you received.
Shelf with drives installed (bezel packaged
separately)
Rack-mount hardware
The following table identifies the types of cables you might receive. If you receive a cable not
listed in the table, see Lenovo Press to locate the cable and identify its use.
Connector type Cable type Use
Ethernet cables
(if ordered)
Management connection
17
To Next Page
Loading...
