Chapter 3. Install and set up 60-drives
3.1. Prepare for installation
Follow these steps to prepare for installation of your DE4000H (4U60), DE6000H
(4U60), or DE600S series storage system.
Steps
1.
Create an account and register your hardware at
datacentersupport.lenovo.com.
2.
Ensure that the following items are in the box that you received.
Shelf, bezel, and rackmount hardware
Shelf handles x4
The following table identifies the types of cables you might receive. If you receive a cable not
listed in the table, see Lenovo Press to locate the cable and identify its use.
Connector type Cable type Use
Ethernet cables
(if ordered)
Management connection
4
To Next Page
Loading...
Need help?
General