Lenovo ThinkSystem HR350A - Front Control Panel

20
2.1.3 Front control panel
Figure 3 Front control panel
1. Power button with power status LED
1. Steady green light: the server is on.
2. Off: the server is off.
3. Blinking green: the server is DC off.
2. System ID button with ID LED
1. Steady blue light: the server is identified.
2. Off: the server is not identified.
3. Press 5 secs, initiate BMC reset.
3. Network status LED
1. Steady green light: the network is connected.
2. Blinking green light: the network is connected and active.
3. Off: the server is disconnected from the network or the server is
off.
4. System health LED
1. Steady yellow light: key component failure.
2. Off: the server is off, or the server is on and is working correctly.
5. VGA connector
6. USB2.0 connector (2)