Lenovo ThinkSystem HR350A - Remote Management Configuration and Access

95
4.2 Configuration of the ThinkSystem Remote Management Module
When first installed, the Remote Management Module by default will search DHCP server on the network to automatically assign IP
address, subnet mask and gateway. It is recommended that users manually set a fixed IP address in the BIOS.
To set an IP address, do the following:
1. Press F1 as soon as you see the logo screen.
2. From the BIOS setup menu, select Server Management ➙ BMC Network Configuration ➙
Configuration Address Source.
3. From the Configuration option, you can choose STATIC or DHCP to set IP address source, Subnet mask, and so on.
4. When you finish the configuration, press F10 to save the settings.
Table 1. IPMI 2.0 Configuration submenu
Configuration
Address Source
STATIC
Static IP configuration. IP and the subnet mask can be set manually.
DHCP
Dynamic IP configuration. The system can obtain IP automatically.