86
3.9.4 BMC Network Configuration
3.9.4.1 Configure IPv4 support
Configuration Address source: This feature allows the user to select the source of the IP address for the BMC network. If Static is
selected, you will need to know the BMC IP and enter it into the system manually. If DynamicBmcDhcp is selected, the BMC IP will be
requested using DHCP from the management controller. If DynamicBmcNonDhcp is selected, the BMC IP will be requested using the
BMC address protocol. If unspecified, option will not modify the BMC network during BIOS booting.
To Next Page
Loading...
