33
2.2.12 Hot-swap power supply replacement
Do not proceed before reading and understanding the "Safety Precautions" section of this chapter and "Read Me First".
CAUTION: Hazardous moving parts. Keep fingers and other body parts away.
CAUTION: Disconnect the hot-swap fan cables before removing the fan from the device to protect against personal
injury.
CAUTION: Never remove the cover on a power supply or any part that has the following label attached.
1. Disconnect the power cord.
2. Push the latch and pull hot-swap power supply out.
To install
1. Slide the hot-swap power supply into the chassis until it snaps into position.
2. Connect the power cord.
To Next Page
Loading...
