Lenovo ThinkSystem HR350A - Page 50

50
- Select Space to add a Space as a parity Bit to Be sent with your data Bits.
The options are None, Even, Odd, Mark, and Space.
Stop Bits
A stop bit indicates the end of a serial data packet. Select 1
Stop Bit for standard serial data communication. Select 2
Stop Bits if slower devices are used.
The options are 1 and 2.
Flow Control
Use this feature to set the flow control for Console Redirection to prevent data loss
caused by buffer overflow.
Send a "Stop" signal to stop sending data when the receiving buffer is full. Send a
"Start" signal to start sending data when the receiving buffer is empty.
The options are None and Hardware RTS/CTS.
VT-UTF8 Combo Key
Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100
terminals.
The options are Disabled and Enabled.
Recorder Mode
Select Enabled to capture the data displayed on a terminal
and send it as text messages to a remote server.
The options are Disabled and Enabled.
Resolution 100x31
Enable or disables extended terminal resolution. The options are Disabled and
Enabled.
Putty KeyPad
This feature selects the settings for Function Keys and KeyPad used for Putty,
which is a terminal emulator designed for the Windows OS.
The options are VT100, LINUX, XTERMR6, SC0, ESCN, and VT400.