Figure 38. Disconnecting cable from RAID adapter
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the air baffle
Use this information to install the air baffle.
1. Read
“Installation Guidelines” on page 28 to ensure that you work safely.
2. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the
bezel pointing toward you.
3. Remove the compute node cover (see
“Remove the compute node cover” on page 32 for instructions).
To install the air baffle, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
DtV8A4UWy7d3AoFKjCvas3
.
60
ThinkSystem SN850 Compute Node Setup Guide
To Next Page
Loading...
