Chapter 3. 3-1
Chapter 3. Reference information
3
This section contains monitor specifications, instructions to manually install the monitor
driver, troubleshooting information, and service information.
Monitor specifications
Table 3-1. Monitor specifications for type-model 63EB-MAR2-WW
Dimensions Depth
178.6 mm (7.03 inch)
Height
470.3 mm (18.52 inch)
Width
488.9 mm (19.25 inch)
Stand Lift
Tilt
Swivel
Pivot
155 mm
-5° to 22°
-360° to 360°
-90 to 90°
Weight Weight with stand assembly 4.3kg(9.4 lbs)
Weight without stand
assembly (For wall
mount or VESA mount
considerations - no
cables)
2.7kg(6.0 lbs)
VESA mount Supported 100 mm x 100 mm (3.94 inch x 3.94 inch)
Image Viewable image size 546.2 mm (21.50 inch)
Maximum height 267.8 mm(10.54 inch)
Maximum width 476.1 mm(18.74 inch)
Pixel pitch 0.2480 mm(0.0098 inch)
Power input Supply voltage 100-240V AC 50/60Hz
Max supply current 1.3 A
Power consumption Normal operation
<27.0W (Max)
<11.0W (Typical)
Note: Power
consumption figures
are for the monitor
and the power supply
combined
Standby/Suspend <0.5 W
Off <0.3 W
Video input (Analog) Interface
Input signal
VGA
Analog Direct Drive, 75 ohm 0.7V
Horizontal addressability 1920 pixels (max)
Vertical addressability 1080 lines (max)
Clock frequency 180 MHz
To Next Page
Loading...
