Chapter 2. 2-3
Adjusting your monitor image
This section describes the control features to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
Icon Control
Description
1
Center
To access OSD menu
Press to confirm selection
Press and hold for 10 seconds will lock menu/unlock menu
Up
For increasing the value on adjustment bar
It is a shortcut key for directly opening speaker volume
adjustment(HDMI/DP connected).
Press to Automatic function(VGA connected)
Down
For decreasing the value on adjustment bar.
It is a shortcut key for directly opening Color mode
selection.
Left
Return to the previous menu page or exit from the
previous function.
Right
Press to enter next level on main menu
It is a shortcut key for directly opening Brightness
adjustment
2 Input Change
Press to switch the video input source while there is no
any OSD on the screen.
Press and hold for 10 seconds to Enable/Disable the
“DDC/CI” .
To Next Page
Loading...
