4
Lenze
4-18
8200 motec/starttec en 12/03
Accessories
Wiring terminals
Wiring terminal Version Area of application
Mains bus connector • 2.5 mm
2
(0.25 - 0.37 kW, 230 V) Looping and connecting of mains
4 mm
2
(0.55 - 2.2 kW, 400 V) cables
4 mm
2
(3-0 -7.5 kW)
using Twin wire end
ferrules supplied by Phoenix
Contact AI-TWIN 2x4-12GY
• Dimension a fuse for the cross-
section used, ensuring confor-
mance with applicable legislation.
Connection terminal fan • 2 x 2.5 mm
2
(plug-in terminals) Connect a separate fan for the motor with
a fan power supply cable
System terminals • 12 x 1.5 mm
2
(plug-in terminals) Looping and connecting of control
• 10 x 1.5 mm
2
cables
(for motec 0.25/0.37 kW)
General features
Wiring terminals can be used to loop and wire mains cables
and control cables in the motec carrier housing.
Mains bus connector E82ZWKN2 for use in
8200 motec 0.55 to 2.2 kW
Mains bus connector E82ZWKN2 for use in
8200 motec 0.25 to 0.37 kW
To Next Page
Loading...
