Lenze
4-23
8200 motec/starttec en 12/03
4
Accessories
Assembly tools
Adaptor plates
Adaptor plates are available for mounting the 8200 motec
and starttec on motors with hole patterns which do not
correspond to the Lenze standard. The plates are designed
to be drilled by the user in accordance with the motor to be
adapted.
Use with Dimensions Hole pattern for motec Order no.
8200 motec 0.25-0.37 kW 120 x 120 x 15 68 mm, M 5 thread EJ0048
8200 motec 0.55-2.2 kW 85 x 85 x 15 73 mm, M 5 thread EJ0047
starttec 120 x 120 x 15 68 mm, M 5 thread EJ0048
8200 motec 3-7.5 kW 125 x 140 x 15 EJ0050
1)
89
M5 thread
1)
In preparation
starttec – Support for function modules
Support for function modules Order no. E71ZJ001
The E71ZJ001 support for function modules must always be
used in conjunction with the following fieldbus modules:
- CAN (system bus)
- INTERBUS
- PROFIBUS-DP and
- LECOM-B
82
101.5
To Next Page
Loading...
