Automation
Automation components
Lenze
3-37
8200 motec/starttec en 12/03
3
Extension Board
The extension boards can be fitted sideways into the
Drive PLC. This makes extending the type and number of
I/O terminals quick and easy using this method.
Extension Board 1 Connections
For the connection of three-wire sensors 6 digital inputs,
and outputs for 24 V brake control LOW level: 0. . . +4 V DC
HIGH level: +13. . . +30 V DC
4 digital outputs,
LOW level: 0. . . +4 V DC
HIGH level: +13. . . +30 V DC
Max. 1 A (up to 40°C, derating 2.5%/°C from 40 °C…55 °C)
2 digital outputs,
LOW level: 0. . . +4 V DC
HIGH level: +13. . . +30 V DC
Max. 2 A (up to 40°C, derating 2.5%/°C from 40 °C…55 °C)
5 terminals each for +24 V DC and GND
(for three-wire sensors)
Extension Board 2 Connections
For the most cost-effective connection of 14 digital inputs
digital sensors and actuators LOW level: 0. . . +4 V DC
HIGH level: +13. . . +30 V DC
8 digital outputs,
LOW level: 0. . . +4 V DC
HIGH level: +13. . . +30 V DC
Max. 1 A (up to 40°C, derating 2.5%/°C from 40 °C…55 °C)
Extension Board 3 Connections
For high-speed counting, length measurements 1 encoder input, TTL, HTL, 500 kHz, two-track with
and control technology applications inverted signals and zero track
8 digital inputs,
24 V potential-free
LOW level: 0. . . +4 V DC
HIGH level: +13. . . +30 V DC
4 digital outputs,
LOW level: 0. . . +4 V DC
HIGH level: +13. . . +30 V DC
Max. 1 A (up to 40°C, derating 2.5%/°C from 40 °C…55 °C)
2 analog inputs (± 10 V, 10 bits + sign)
Designation Order no.
Extension Board 1 EPZ-10201
Extension Board 2 EPZ-10202
Extension Board 3 EPZ-10203
To Next Page
Loading...
