EasyManua.ls Logo

Lenze 930 Series

Lenze 930 Series
60 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical data
General data and operating conditions
2
42
MA 13.0001 DE-EN DE/EN 2.0
2 Technical data
2.1 General data and operating conditions
Conformity CE Low-Voltage Directive 73/23/EEC
Regulations EN 61800-3 Interference level B
Climatic conditions Air humidity max. 90 % without condensation
Cooling Passively via housing surface and rear panel
Permissible temperature ranges
Transport -25 °C... +70 °C
Storage -25 °C... +70 °C
Operation 0 °C ... +50 °C above +40 °C, reduce the power by
20 W/°C
Permissible installation height 0 ... 1000 m amsl above 1000 m amsl, reduce the rated
output current by 5 %/1000 m
Mounting position Vertical
Mounting clear ances
above/below 100 mm
sidewise Directly alignable
Monitoring Overvoltage / undervoltage in the DC bus, overcurrent or
short circuit of the output stage, motor temperature and
output stage temperature, I
2x
t-monitoring of the motor,
encoder monitoring
Type of protection IP 20
Inputs 6 digital inputs, 2 analog inputs
(adjustable via software)
Outputs 2 digital outputs, 2 analog outputs
(adjustable via software)
Bus system CAN (DS301, DSP402)
Memory cards Multimedia card

Related product manuals