Lenze C 750

Safety instrucons
Disregarding the following basic safety measures and safety informaon may lead to severe personal injury
and damage to property!
Observe all specicaons of the corresponding documentaon supplied. This is the precondion for safe
and trouble-free operaon and for obtaining the product features specied.
Please observe the specic safety informaon in the other secons!
Basic safety instrucons
Personnel
The product must only be used by qualied personnel. IEC 60364 or CENELEC HD 384 dene the skills of
these persons:
•
They are familiar with installing, mounng, commissioning, and operang the product.
•
They have the corresponding qualicaons for their work.
•
They know and can apply all regulaons for the prevenon of accidents, direcves, and laws applicable at
the place of use.
Product
The product must never be technically modied!
If you carry out any technical modicaons or alteraons that are impermissible, all your warranty claims
will become void and the product liability will be excluded!
Device protecon
•
The maximum test voltage for insulaon tests between a control potenal of 24 V and PE must not
exceed 110 V DC (EN 61800−5−1).
Applicaon as directed
The product is a piece of electrical equipment. The product is solely suited to be installed in control cabinets
or similar closed electrical operang areas, and to implement control concepts, operaonal concepts, or to
represent informaon in customary industrial and commercial areas.
For the purpose of prevenng injury to persons and damage to material assets, higher-level safety systems
have to be used!
Safety instrucons
Applicaon as directed
21